Product Features
Membrane Coating
The released agent can form membrane by means of chemical reaction curing.
Thermal Curing, UV Light Curing, and electronic beam curing
Demoulding
High & Low Temperature Resistance
Adherence to Substrate
Product Information
|
Applications |
Product |
Properties |
|
|
KS-776A |
Most applicable to tape, but also applicable to label. |
|
KS-839L |
Rapid peeling. |
|
|
KS-847T |
Easy peeling with acyclic acid solution type adhesive |
|
|
Light Peeling Use |
KS-779H |
The peeling is lightest among all easily peeling products. |
|
KS-837 |
The polyethylene paper layer product is easy to be peeled, the smoothness is good. |
|
|
KS-778 |
Extremely good solidification. Excellent easily peeling product. |
|
|
|
KS-830 |
Heavier peeling force than KS-776A. applicable to tape. |
|
KS-3502 |
Heavier peeling force than KS-776A. Small smoothness. Can use multiple layers for adhesion. |
|
|
|
KS-723A/B |
Have coatability that general silicone released agents do not have. |
|
Peeling Control Use |
KS-3800 |
Peeling force control agent. |
|
|
KS-774 |
Good tightness to aluminum foil, OPP, PET, PE membrane. Have good residual adherence. Good product applied to membrane. |
|
KS-3703 |
Have better solidification and adhesion than KS-774. |
|
|
|
KS-835 |
KS-778 low adhesion type. |
|
KS-847 |
KS-847T low adhesion type. Better exposure resistance. Good solidification. |
|
|
|
KM-3951 |
|
|
KM-768 |
Middle peeling. Applicable to tape. |
|
|
X-52-170 |
Light peeling. Applicable to usual label. Especially low speed peeling property. |
|
|
X-52-179 |
Good residual adherence. |
|
|
|
KNS-3051 |
Easy peeling with respect to polyethylene paper layer products. |
|
KNS-303 |
Have sliding property. Applicable to making PE coated paper product. |
|
|
KNS-320A |
Light peeling. Applicable to usual tape and label |
|
|
KNS-316 |
Middle peeling. Applicable to usual tape and label. |
|
|
KNS-3002 |
Heavy peeling use. |
|
|
KNS-3300 |
Heavy peeling control agent. |
|
|
Non-Solvent Addition type, UV
|
X-62-7622 |
|
|
X-62-7052 |
Free of accelerant. One solution type. Partial coating is possible. Mercapto modification. |
|
|
KF-2005 |
Need catalyst. Rapid curing. Acrylic acid type. Need to flush nitrogen. |
|
|
UV Curing Membrane Use |
KS-5508 |
Middle peeling. Applicable to substrate with low heat resistance. |